Dynaverse.net
Taldrenites => Starfleet Command Models => Topic started by: Raven Night on February 10, 2004, 03:02:22 pm
-
The Romulan DVoridex class Dreadnought. This is a rather large vessel, about twice as big as a DDeridex. It is the Capital ship of the fleet.
You can check out the progress here:
DVoridex thread at BCU
The model is finished for BC, Starforce has to set it up and port it over to SFC.
As you know, all ships for BC2 will be ported over to SFC when completed.
-
that look a lot like the romulan battleship from sfc2opd2 mod pack, you can go see the pic at my site at: http://www.freewebs.com/eras-of-war/mods.htm
-
Nice work.......is this the same Eras at War that was on Nightsoft?
-
She's a wonderful looking vessel! I REALLY want her in my game!
I've liked this design ever since I saw her over at Nightsoft.
There's a BUNCH of concepts that are very deserving of a model.
BTW, as I was reading through the BC forum, a poster named Armondikov mentioned a ship called the "Infinity" as being able to take on a D'Voridex.
Any idea what he's talking about?
-
Quote:
She's a wonderful looking vessel! I REALLY want her in my game!
I've liked this design ever since I saw her over at Nightsoft.
There's a BUNCH of concepts that are very deserving of a model.
BTW, as I was reading through the BC forum, a poster named Armondikov mentioned a ship called the "Infinity" as being able to take on a D'Voridex.
Any idea what he's talking about?
I think the infinity makes the excalibur look weak.
-
The Infinity is the star of the BC2 mod, the most powerful ship in the Starfleet Marine Corps Third Fleet. It is a huge ship that was designed to operate as a battlestation. It is basically a battle carrier.
And yes, it would be a good match for any capital ship.
-
Quote:
Nice work.......is this the same Eras at War that was on Nightsoft?
well yes and no, i got all the mods from the ers of war that was on nightsoft but the original owner have close it and he seem to have leave the startrek world, so i decide to re created a new eras of war to replace the original so the mods will be aivalable to anyone looking for these mods.
-
Cool!
Can we see a pic?
Actually, I searched the BCU site just now and found the Infinity design thread.
Wow! The Infinity is MOST impressive.
When she is completed, she MUST be ported over to SFC! She must!
After all, D'Voridex needs a worthy opponent, right?
-
It will be

After all, I can't forget my roots in SFC. All models made for the mod will be ported to SFC, and our new models for the crew (if we are able to accomplish this) will be ported to EF.
-
That's VERY cool! I'll be first in line to grab 'em!
So, about how many original (i.e. non canon) designs will be part of this BCU mod?
-
All of the ships in the mod will be brand new designs......well, most of them......a few are refits, but more than 60 percent of the original design is changed. There are no canon ships in this mod, period.
-
Ok, here are images of the completed mesh. There is someone currently working on the conversion for SFC.

-
Bad ass ship. Where are the warp engines? I dont see any green glows. Are they hidden? Are they on the ends of the wingtips? Where r they?
-
Gimme,gimme,gimme please.How soon will it ported to SFC.More Romulans woohoo.That's one sweet ship.

-MP
----------------
ModelsPlease@aol.com
-
Impressive......Most Impressive.
Although I would agree on the lack of visible nacelles.
-
The engines are indeed within the inner wingtips.
-
Quote:
The engines are indeed within the inner wingtips.
gotta have illumination. i want to see them! ???
-
the texture is cool but that's all
-
Quote:
Quote:
The engines are indeed within the inner wingtips.
gotta have illumination. i want to see them! ???
It has illumination
-
I wanna see the WHOLE thing?flying in SFC that is!
-
Quote:
Quote:
Quote:
The engines are indeed within the inner wingtips.
gotta have illumination. i want to see them! ???
It has illumination
Engine illumination...???
it looks like an aerial glider...
where r the engines?
-
The engines are in the wintips.
The angles you see disguise them.
Trust me, they're there.
-
I will put up better angle pics to show off the details and the engines when I get my system back up to 100 percent. A few more days and it will be there.
If you run over to the thread at BCU you can see the progress of the model...there are some engine shots in the thread. You can also check out the Saif and the Pveer, two more of LC's works of art
-
Hey Raven Night!
I been combing the BCU forums for the Saif and Pveer threads with no luck.
Any way you can post links?
-
heh I'm not Raven but I got the links for you, since I was there
Pveer
Saif
-
Wow Wee Wow Wow Wow !!!
Thank you Viper/VR!
I'm reaaaaally hoping those two beauties make it over to SFC as well!
-
Every model that is made for BC2 will also be released for SFC.......I have to do that. After all, this is my original home. I am trying to get versions for all 4 games (SFC1, OP, 2 and 3). There are some limitations in 3, so I will have to fudge on the weapons a bit for some of the models.
There are about 15 models in various stages of development, most of them mesh built with no textures. The closest ones to completion are this one, the Saif and the Pveer. The next one up is probably the DDeridex refit, followed by the new Scorpion B.
-
WOW.
I cannot wait to get these 3 ships.Heck I've seen the designs over at Nightsoft.I want them ALL flying in my fleet.
-MP
----------------------
"Was that over the top? I can never tell."-E Nigma
ModelsPlease@aol.com
-
They are all coming. We are also hoping to get ahold of Korah so we can compensate him for and release the BaQ, DXorac and the Nohquv.
Thanks for the compliment on the designs. The more I do it, the better I get, but I still have a long way to go.
-
A long way to go? These ships are awesome and as a novice at modeling quite intimidating to me. I was about to post a Gorn I was working on but after seeing these I might just wait a couple of years. I guess I have about a million miles to go
by comparison.
Can't wait to update my shiplist.....keep 'em coming.
-
You shouldn't sell yourself short. Everyone has to start somewhere.
Here are some renders of the Dvoridex. I did simple ones, without illumination in Max just to show some of the details. Note the space in the top of the neck, the engine detail, etc.
-
<fingers tap desk>
well.. im waiting... where is it?
<grin>
-
Viper is working on the conversion for SFC3 at the moment. DM will be doing the SFC1/OP and SFC2 versions I am told.
-
Bump!
-
sfc 2 and op are ready too go just waiting on the ok
DM
-
Whooo!
-
SFC3 version is also ready to go apart from 1 small little hickup.
-
Fantastic guys......if you could send me the files so I can peek at them, I would appreciate it.
Please make sure to include your own personalized info section and the credits you want displayed. I want people to know that you guys did the conversions.
-
By the way, I was unable to find anyone to fix the problem you were speaking of. Perhaps someone can help here?
-
Ok, well if your fine with the way it is I can leave it as is? If so I'll zip it up for you to test ingame immediately
-
Ok, great.......I cant play it in game (I dont have the game installed) but I have a few model viewers I can use.
-
Raven, I sent you a pm on bcu with the details.
-
Bumpity, bump, bump.
-
Quote:
Bumpity, bump, bump.
A bump after 1 minute I post?
-
Maybe he didnt see your post?
-
Thanks.......I see what you mean about viewing it in a model viewer. When I made BMPs using the TGAs, the textures showed up.
Let's see.......who should I have beta test this puppy.......
-
lol yeah, bmp = ugly though. Do you want me to post up some screenshots of it ingame?
-
How are .bmps ugly? They're the same amount of detail as .tgas are they not? 'cept they don't show in the viewer.
In any case please stop torturing us and release this ship
-
i agree with lestat.
-
Yes, please do.
I will find someone to betatest this and get this out pronto. I am looking to release it at the same time as the SFC2-OP and BC versions, so I will have to check with DM and Starforce.
-
sfcop!!!
weeeeeeeeeee
-
I just have to mention this..........there is no truer name for a fan than "Modelsplease"
-
Quote:
I just have to mention this..........there is no truer name for a fan than "Modelsplease"
Thank you Raven Night Sir.
I'm beside myself with anticipation for the models you will be releasing soon.
-MP
ModelsPlease@aol.com
-
Quote:
Quote:
I just have to mention this..........there is no truer name for a fan than "Modelsplease"
Thank you Raven Night Sir.
I'm beside myself with anticipation for the models you will be releasing soon.
-MP
ModelsPlease@aol.com
no kidding, wish I would have thought of that too! that is a darn good name!
-
Monday Bump
-
Hey everyone,
Just wanted to thanks for the comments on the model.
Cpt.
-
You guys should see the other models he is working on for BC2. All of the ships will make thier way into SFC, so If you want to see what is coming, trot over to BCU to take a look.
-
Here I present.....the 'Big Bird' series of ingame screenshots
One of my favourites is this screenshot, I call it Big Bird Very Angry
Feel the pain?
-
Nice in game shots

A question however........is that glow poking through the outside of the nacelle normal for SFC3?
-
Is it done yet?
Is it done yet? 
This one's well worth the wait.

Well? I'm waiting....................... 
And waiting.............................. 
Yup I'm still here....................... 
Ok where is it ????????????? 
GIMMIE GIMMIE GIMMIE............. 
I want the ModelsPlease

It's look great in game sir
-MP
-
Quote:
Nice in game shots 
A question however........is that glow poking through the outside of the nacelle normal for SFC3?
Oh yeah.. a lot of Glow leaks.. LOL
Cpt.
-
raven, needs to turn glow square aspect off.
-
It is, but it still gets through a little
-
yeah. its neglegible really. i dont think raven should worry about it.
-
Ok, so what do you think? Is it ready in your opinion for release? I have no way to test the file myself.
-
Just a bump to see the status on the beta test.