Topic: A new one coming down the line.. a TMP-era CVA project (and heads whirl!) (Read 6813 times)

Fury_of_a_Seraph · « **Reply #20 on:** March 06, 2004, 10:49:45 am »

I agree with captain on on the impulse engine bit...Make the current imulse engine the Landing Coordination Facility or something like that and put the impulse engines on the saucer ALA:Galaxy.

My two cents.

atheorhaven · « **Reply #21 on:** March 06, 2004, 10:57:16 am »

Quote:

So far so good, retexturing the lower hull with the Excelsior pattern is going to be a problem though, lots of work to do that.

You have no idea..

It's taken me four days just on that alone, but that's taking into account my limited time, and also fitting it in with the placement of where things are on anduril's mesh.

Quote:

I also have to agree though that the impulse engines blowing acroos the fight bays and against the warp engine pylons is bad though.

Addressed and fixed now. I had the same concern, and raised the saucer so the flight deck wasn't washed at impulse.

Quote:

You can retexture those into hugh windows though like an observation louge and then add the impulse engine to the top. Use the rear firing photon assembly from the Excalibur as the engines it is samll enough not to impact on the model much.

Well, one thing though I get with this ship is that the carrier hull probably doesn't have too many living quarters, and because of that and this being a carrier, you'd want to minimize the amount of windows and other holes in your ship because this is going to be a ship that is going to get pounded on. I get the impression that in an emergency situation, the saucer can detach and leave the carrier hull behind, having the crew section and their quarters with the surviving saucer while the fighters, munitions, warp core and really boom-y stuff goes "boom" behind in the carrier hull. As such, I think that space is going to be tight on this ship in the saucer, pretty well as much as any carrier design that I've ever heard about (even in the present). One thing that you guys have to keep in mind though.. in my version of Max (r3.1), for some reason, illumination mapping can sometimes show as white squares if white squares are used for the illumination maps. So those big white squares seen from the back aren't really windows, and if the crew decided to go stargazing out them, I think their bodies get atomized and are used to push the ship forward.

Those are the impulse engines. (grin).

ModelsPlease · « **Reply #22 on:** March 06, 2004, 11:02:40 am »

An Enterprise B / Lakota refit saucer would solve the issue of impulse engine placement. Using it allows for shuttle bays and impulse engines. My $.02
-MP

NannerSlug · « **Reply #23 on:** March 06, 2004, 12:33:23 pm »

i just had that same thought models.

Rogue · « **Reply #24 on:** March 06, 2004, 01:05:01 pm »

Post deleted by Rogue

sandman69247 · « **Reply #26 on:** March 06, 2004, 01:15:08 pm »

Alec, that is awesome!!

Oh, and I can finally afford to do something for you that I've been saying I'd do for, what, a year and a half? Now, if I can only find your address...

Great work bud, as always.

atheorhaven · « **Reply #27 on:** March 06, 2004, 01:21:49 pm »

Um, guys.. I don't see an issue now with impulse engine placement. Engines are now well above the flight deck, and if you have fighters landing in the saucer hull now, they'll be flying across the field of launch, plus you'll have to have a mechanism to get them from the saucer down to the carrier hull. I'd have to think that the neck is too thin to support that massive a mechanism.

J, I can PM it to you again so you don't have to dig too hard..

The_Infiltrator · « **Reply #28 on:** March 06, 2004, 01:37:50 pm »

The only suggestion I have is that you might want to alter the body in the front so you can place a main deflector dish.

atheorhaven · « **Reply #29 on:** March 06, 2004, 01:40:32 pm »

Main deflector dish pic:

Already there.

FPF_TraceyG · « **Reply #30 on:** March 07, 2004, 05:59:02 pm »

Looking great! Impulse engines are in a better position now, the Excelsior primary hull really suits this ship. as do the longer warp engines.

red_green · « **Reply #31 on:** March 08, 2004, 03:22:12 am »

Iv'e been out of the loop for awhile so I just been checking threads and well I am glad I caught this one. That ship is a beauty. Nice mix of asthetics with function. Only thing is I want a TOS version.

ModelsPlease · « **Reply #32 on:** March 08, 2004, 03:36:46 am »

Hi all,I've been reading this thread and it's a great debated about the fighters and launching/recovery etc. I just wanted to add my $.02 so here goes...Battlestar Galactica, fighters launched from tubes in the sides of the hanger bays and then were recovered through the large hangers in the back of those bays.Why not make the secondary hull look like the galactica hanger ? Not in shape mind you but in it appearance,multiple angled launch tubes flush with the hull and one large recovery hanger in the rear.Perhaps it's not the right idea for THIS particular ship,but maybe I have given somebody an idea to run with.

-MP

Kaenyne · « **Reply #33 on:** March 08, 2004, 08:50:00 am »

Wow!

This ship is looking fantastic, Atheorhaven.

BTW, how'd you like those in-game pics I sent?

Mariner · « **Reply #35 on:** March 08, 2004, 04:08:30 pm »

Hmm, try rehaping the secondary hulls bottom ventral area a bit, because the front view looks icky.

Everything else looks 1337 though, so r0cK 0n!

atheorhaven · « **Reply #36 on:** March 08, 2004, 05:48:59 pm »

Loved the shots K.. it was nice to see the TOS Starbase of mine in use as well.

Much appreciate seeing that in a game, there was one area where I was a bit worried about the textures, but they look fine.

And your Ent-A looks like it's ready for a pivotal meeting with the Klingons.

Okay guys.. barring two or three more small texture changes (and maybe one more small mesh change depending on how things look if I try it), the ship is almost complete.

I noticed that there was a small area near where the neck joined where I was getting some illumination seepage from the deflector area in a really strange way, so I decided that the neck piece I was considering would be a good idea as well. Took some tweaking, viewing, more tweaking, more additions, but I think I have it where I want it now. And it also give the oppourtunity to show off the new deflector a little bit by giving the new neck bottom some reflection. And I also tweaked the nacelle illumination, added a lot of lower saucer illumination, and some other minor tweaks.

So, I think we're almost ready to fly here. Just want to go over 'er once or twice more looking for mesh errors, illumination problems, etc., and if I see nothing else really glaring, then I'll release it for play.

Rogue · « **Reply #37 on:** March 08, 2004, 08:38:32 pm »

This is great news. I have wanted to see this one for many a moon and it is soon to be. Great time of year for Christmas revisited. This is a fun starship to fly and it will be even a bit more fun now. Thank you for building this one Atheorhaven.

Let's see... now what would a carrier task force look like? And be deployed for what reason? There are a couple of ideas that come to mind.

DestinyCalling · « **Reply #38 on:** March 08, 2004, 08:41:31 pm »

Looking good!!!!

How the hell do you guys work so quickly???!!!

Captain Pierce · « **Reply #39 on:** March 08, 2004, 09:09:18 pm »

Overall, I'm really liking this baby. But I do have just one question--should the nacelle pylons really be going right into the blue glowy top of the nacelles?

News:

Topic: A new one coming down the line.. a TMP-era CVA project (and heads whirl!) (Read 6813 times) var addthis_config = {"data_track_clickback":true};

Fury_of_a_Seraph

atheorhaven

ModelsPlease

NannerSlug

Rogue

Rogue

sandman69247

atheorhaven

The_Infiltrator

atheorhaven

FPF_TraceyG

red_green

ModelsPlease

Kaenyne

Rogue

Mariner

atheorhaven

Rogue

DestinyCalling

Captain Pierce

Topic: A new one coming down the line.. a TMP-era CVA project (and heads whirl!) (Read 6813 times)