Topic: Anaconda Class RELEASED!!!! 5/22/2006 (Read 12114 times)

Antivyrus · « **on:** January 01, 2006, 07:06:39 pm »

Anaconda Class disign by Atolm
build by request

Anthony Scott · « **Reply #1 on:** January 01, 2006, 07:51:14 pm »

Now THAT is what I call a beautiful design...no kit bashing here (well, maybe a little...)

Anyway, good work!

Semper Fi, Carry On

Antivyrus · « **Reply #2 on:** January 02, 2006, 12:32:39 am »

UPDATE:

mesh nearly complete, just have the bridge dome and rear phaser strips to do
how ever I did do one design change, I used my own nacelle design as I truely did not like the look of the origanal nacelle design on this ship. I did keep a copy of the mesh with the origanal nacelles just incase some of you would prefer them.

ModelsPlease · « **Reply #3 on:** January 02, 2006, 01:06:09 am »

That's awesome bro !!!!!!!!!!!!

-MP

Darkdrone · « **Reply #4 on:** January 02, 2006, 11:23:58 am »

dam thats one fine looking model you have theere man

DD

Major A Payne · « **Reply #5 on:** January 02, 2006, 12:30:29 pm »

Looks excellent AV. I don't normally comment of untextured models but this is one I must get hold of when and if its released.

ModelsPlease · « **Reply #6 on:** January 02, 2006, 10:37:41 pm »

Quote

I did keep a copy of the mesh with the origanal nacelles just incase some of you would prefer them.

Yes please I would prefer them thanks AV you rock !!!!

Magnum357 · « **Reply #7 on:** January 03, 2006, 02:29:58 am »

I'm not a big fan of Post-Tng designs (the Soverign and the Defiant are about it for my tastes) but I must admit this design intrigues me some. Who designed the sketches for this? It almost looks like that the saucer section could seperate with its own warp drive system. Basically a ship with two Warp Cores that can seperate into two vessels if needed. If so, I think I like this design more then the Prometheous. The prometheous just seemed too be too compact and complicated on its outward design perameters, but this ship looks like it might be easier to construct.

DookeyKing · « **Reply #8 on:** January 03, 2006, 10:32:02 am »

Any chance of a 2 nacelle version of this being released?? I like the overall design, but that nacelle support structure on the top really ruins the design for me. Anyway, great looking mesh.

Scott

ModelsPlease · « **Reply #9 on:** January 03, 2006, 11:37:43 am »

Quote from: Magnum357 on January 03, 2006, 02:29:58 am

I'm not a big fan of Post-Tng designs (the Soverign and the Defiant are about it for my tastes) but I must admit this design intrigues me some. Who designed the sketches for this? It almost looks like that the saucer section could seperate with its own warp drive system. Basically a ship with two Warp Cores that can seperate into two vessels if needed. If so, I think I like this design more then the Prometheous. The prometheous just seemed too be too compact and complicated on its outward design perameters, but this ship looks like it might be easier to construct.

Azel/Atolm designed it.

Magnum357 · « **Reply #10 on:** January 03, 2006, 07:48:35 pm »

Quote from: DookeyKing on January 03, 2006, 10:32:02 am

Any chance of a 2 nacelle version of this being released?? I like the overall design, but that nacelle support structure on the top really ruins the design for me. Anyway, great looking mesh.

Scott

Dude, didn't you read my above statement? Maybe its suppose to have 4 naccels like that. Maybe it can seperate into two vessels like the Galaxy class with there own Stardrive. I'm not sure what would be the point of the upper structure if this isn't the case.

Antivyrus · « **Reply #11 on:** January 03, 2006, 08:44:27 pm »

Quote from: Magnum357 on January 03, 2006, 02:29:58 am

I'm not a big fan of Post-Tng designs (the Soverign and the Defiant are about it for my tastes) but I must admit this design intrigues me some. Who designed the sketches for this? It almost looks like that the saucer section could seperate with its own warp drive system. Basically a ship with two Warp Cores that can seperate into two vessels if needed. If so, I think I like this design more then the Prometheous. The prometheous just seemed too be too compact and complicated on its outward design perameters, but this ship looks like it might be easier to construct.

this what ya meant Magnum?

ModelsPlease · « **Reply #12 on:** January 03, 2006, 11:10:37 pm »

That's awesome !!!!!!!!!!!!!!!

wulf111 · « **Reply #13 on:** January 04, 2006, 06:51:48 am »

you could also separate the saucer section like on the prometheous (sp?)

DookeyKing · « **Reply #14 on:** January 04, 2006, 10:51:38 am »

Quote from: Magnum357 on January 03, 2006, 07:48:35 pm

Quote from: DookeyKing on January 03, 2006, 10:32:02 am
Any chance of a 2 nacelle version of this being released?? I like the overall design, but that nacelle support structure on the top really ruins the design for me. Anyway, great looking mesh.

Scott

Dude, didn't you read my above statement? Maybe its suppose to have 4 naccels like that. Maybe it can seperate into two vessels like the Galaxy class with there own Stardrive. I'm not sure what would be the point of the upper structure if this isn't the case.

I didn't say I didn't get it, I just said I don't like it. The prometheus doesn't look like the hunchback of Notre Dame when it's not seperated. I'm not knocking Atolm's skills, but that one aspect of this design doesn't work for me. And to get away from my negativity, I will once again say that this is a dang fine mesh

.

Scott

Sandman3D · « **Reply #15 on:** January 04, 2006, 09:09:25 pm »

Awesome mesh!! I take my hat off to ya...my TNG+ ships look like crap, that's why I pretty much stick with LE and earlier.

Antivyrus · « **Reply #16 on:** January 04, 2006, 10:34:44 pm »

Update:

mesh is completed, both variants with the original nacelles and with my nacelles

mapping is completed

just gotta ship em off to the paint shop for some clothes

Starforce2 · « **Reply #17 on:** January 06, 2006, 07:14:47 pm »

Quote from: DookeyKing on January 04, 2006, 10:51:38 am

Quote from: Magnum357 on January 03, 2006, 07:48:35 pm
Quote from: DookeyKing on January 03, 2006, 10:32:02 am
Any chance of a 2 nacelle version of this being released?? I like the overall design, but that nacelle support structure on the top really ruins the design for me. Anyway, great looking mesh.

Scott

Dude, didn't you read my above statement? Maybe its suppose to have 4 naccels like that. Maybe it can seperate into two vessels like the Galaxy class with there own Stardrive. I'm not sure what would be the point of the upper structure if this isn't the case.

I didn't say I didn't get it, I just said I don't like it. The prometheus doesn't look like the hunchback of Notre Dame when it's not seperated. I'm not knocking Atolm's skills, but that one aspect of this design doesn't work for me. And to get away from my negativity, I will once again say that this is a dang fine mesh .

Scott

the top section sorta looks like the ent-j when separated.

Magnum357 · « **Reply #18 on:** January 07, 2006, 12:35:16 am »

I really like how this design is coming out. And I think it looks neat too see it in seperated ships in those few pics above. Also, I think I kinda like the original Warp engines then the new ones, but thats just my preference.

question, where will you release this model at?

Antivyrus · « **Reply #19 on:** January 07, 2006, 04:50:22 am »

Quote from: Magnum357 on January 07, 2006, 12:35:16 am

question, where will you release this model at?

when it's ready I'll prolly release at Battleclinic

News:

Topic: Anaconda Class RELEASED!!!! 5/22/2006 (Read 12114 times) var addthis_config = {"data_track_clickback":true};

Topic: Anaconda Class RELEASED!!!! 5/22/2006 (Read 12114 times)